Product Highlights Zimmer MEP SHARK 282 CCS band saw with semi-automatic lowering
Band saw machine for cuts from 45° right to 60° left.
The CUT CONTROL SYSTEM allows a semi-automatic lowering of the saw blade by the weight of the saw head. The lowering speed is infinitely variable. Individual cuts can thus be carried out at a uniform feed rate. The SHARK 282 CCS has a turntable for mitre on both sides. The cut is therefore always made in the same groove.
- Vise with quick adjustment and adjustable guide rails
- Hydraulic belt tensioning device with tension pressure indicator
- Base frame with removable coolant tray
- Chip removal brush
- Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right
- Length stop for cuts of equal length
- Material support arm, simultaneously connection possibility for roller conveyor/loading side
- Rotary table for double mitre cuts
- machine is designed for lift truck/forklift transport
- Bimetal saw blade M2 for solid and profiled material
- Tools and operating instructions
- Switchboard
- marked cable connections
- Control lamp for operational readiness
- Safety main switch
- Emergency stop button
- Speed changeover switch
- Thermal magnetic protection
- Undervoltage release
- Control handle IP 55 protected
- Phase Comparator
- Low voltage system 24 Volt
- Electrical coolant unit 48 V
- (mounting of a micro-spraying device possible)
Technical data Zimmer MEP SHARK 282 CCS band saw machine with semi-automatic lowering
| Engine power |
1,5/1,8 kW |
| Bank opening |
285 mm |
| Tape measures |
2950x27x0,9 mm |
| Weight |
440 Kg |
| Speed |
36/72 m/min. |
| Cutting surface 0° |
250 / 220x220 / 280x220 |
| Cut surface 45° right |
230 / 200x200 / 220x200 |
| Cut surface 45° left |
200 / 170x170 / 200x140 |
| Cut surface 60° right |
120 / 80x80 / 140x80 |
| Cut surface 60° left |
We would be happy to advise you on the machine and the extensive range of accessories by telephone.
In addition, we can possibly arrange a desired on-site appointment by arrangement!
