ELMAG PROTECTION GAS WELDING PLANT PROFI-MIG 3000 PLUS / MIG 274

Standard equipment ELMAG PROTECTION GAS WELDING PLANT PROFI-MIG 3000 PLUS / MIG 274:

• Original BINZEL hose package MB EVO 25 / 4 m
• Earth cable with welding cable plug / earth clamp
• Pressure regulator with 2 manometers Ø 60 mm
• Feed rolls wire diameter 0,6 / 0,8 mm
• Feed rolls wire diameter 1,0 / 1,2 mm
• Wire spool adapter 5 kg / 200 mm
• Wire spool adapter 15 kg / 300 mm
• Separating spray for welding nozzles
• Operating instructions / CE

• mixed gas 82% Ar / 18% CO2, 20 lt. filled
• Steel welding rod SG2 (G3 Si 1) 1.0 mm / 15 kg

Technical facts ELMAG PROTECTION GAS WELDING SYSTEM PROFI-MIG 3000 PLUS / MIG 274:

PROFI-MIGplus - Overview:

1. ergonomic control panel, angled arrangement
2. operating mode switch: 2-stroke welding mode for tack welding, 4-stroke welding mode for long welding distances, Spot welding mode selection, Interval welding mode selection, Wire retraction without gas consumption
3. step switch
4. wire feed regulator stepless
5. spot welding automatic infinitely variable
6. automatic interval welding infinitely variable
7. main switch with operating lamp
8. temperature control lamp - overload protection incl. automatic reset, thermo sensor integrated in transformer winding
9. tool tray with anti-slip coating
10. ground fine/coarse socket Ø 13 mm, 35/50 mm² for choking
11. hose package connection EURO standard for BINZEL
12. high-performance transformer with first-class, rear-ventilated copper winding, winding materials insulation class H (180°C)
13. optimally dimensioned silicon plate rectifier for highest welding current quality
14. wire feed gear drive, four rollers
15. powerful cooling fans, thermal overload protection

Typical applications:
Mechanical engineering, steel construction, locksmith's shops, forging shops, agriculture

Materials:
steel, CrNi, aluminium

Technical data ELMAG PROTECTION GAS WELDING PLANT PROFI-MIG 3000 PLUS / MIG 274

• Material thickness: 0.5 - 10 mm
• Steel / stainless steel wire diameter: 0.6 - 1.2 mm
• Welding voltage adjustment range: 15.5 - 27.3 V
• Aluminium wire diameter: 1.0 - 1.2 mm
• Welding rod roll diameter: 200 / 300 mm
• Welding rod roll weight: 5 / 15 kg
• Welding current setting range: 30 / 265 A
• Welding current switching steps: 10 No. of switching steps
• Earth connection plug / cross-section: 13 / 35 Ø / mm²
• Duty cycle (10 min at 40°C) at welding current: 100 / 130 % / A
• Duty cycle (10 min at 40°C) at max. welding current: 20 / 265 % / A
• Max. input power: 19.1 A
• Mains connection / phases: 400 / 3 V / ~
• Mains frequency: 50/60 Hz
• Mains fuse slow-blow: 16 AT
• Protection class (IP): 21 S
• Feed drive: 4 rollers
• Connection plug: CEE 16 A
• Width: 540 mm
• Depth: 850 mm
• Height: 780 mm
• Weight: 80 kg

Highest quality machines from ELMAG
Benefit from a 2-year ELMAG warranty

Accessories for ELMAG machines on request