Product Highlights ELMAG MULTIFUNCTION WELDING INVERTER, - STEEL ALU SET 2
Flexible use for MIG/MAG, TIG DC and MMA. Continuous or pulsed operation (MIG/MAG / TIG), ideal e.g. for thin aluminium, stainless steel and precision seams.
MOD. ETP 220 SYNPULS - STEEL-ALU-SET MAG SG2 (1.5125) + MIG ALSI5 (3.2245) CONSISTING OF:
- 1 PC. ETP 220 SYNPULS ART. NO. 00360
- INCL. ELECTRODE HOLDER CABLE 25MM²/4M,
- PLUG 16/25MM², EARTH CABLE 25MM²/3M, PLUG 16/25MM², PRESSURE REGULATOR WITH 2 MANOMETERS,
- 3,5M CARBON PTFE CORE, EACH 2 PCS. FEED ROLLERS FOR
- 0,6/0,8 MM & 1,0/1,2 F. FE/CRNI/CUSI, TS & 0,8/1,0 ALU, HA, HOSE PACKAGE ORIG. BINZEL MB 25/3M
- 1 RLL. WELDING WIRE 0,8MM / 5 KG SG2
- ART. NO. 54152
- 1 PC. STEEL CYLINDER MIXED GAS 20 LT. FILLED
- ART. NO. 54202
- UN 1956 COMPRESSED GAS, N.O.S.
- (ARGON+CARBON DIOXIDE), CLASS 2, ADR
- *TRANSPORT WITHOUT EXCEEDING THE LIMITS SPECIFIED IN 1.1.3.6.
- 1 PC. HOSE PACKAGE ORIG. BINZEL MB EVO 25/3M-ALU
- ART. NO. 59326
- 1 RLL. ALUMINIUM WELDING WIRE 1,0MM / 2 KG ALSI 5
- ART. NO. 54144
- 1 PC. STEEL BOTTLE ARGON 20 LT. FILLED
- ART. NO. 54242
- UN 1006 ARGON, COMPRESSED, CLASS 2, ADR *CARRIAGE WITHOUT EXCEEDING THE EXEMPTION LIMITS SPECIFIED IN SUBSECTION 1.1.3.6.
- NOTE: SINGLE PHASE/32 AMPERE MAINS CONNECTION REQUIRED. CLARIFY LOCAL CONDITIONS WITH YOUR EVU BEFORE INSTALLATION!
Application examples ELMAG MULTIFUNCTION WELDING INVERTER, - STEEL ALU SET 2
- Car workshops
- Repair/assembly area
- Plumbing shops
- Customer service
- Metal, conservatory & window construction
material:
- Steel
- CrNi
- Aluminium
- MIG brazing
Technical facts ELMAG MULTIFUNCTION-WELDING INVERTER, - STEEL-ALU-SET 2
ALU+STAHL-SET:
Hose set MB 25/3m, earth cable 3m, pressure regulator,
E-holder cable 4m, PTFE core 3m, various feed rolls,
SG2 welding rod 0.8 mm / 15 kg,
AlSi welding rod 1,0 mm / 7 kg,
Steel bottle 20 lt. / 200 bar mixed gas,
steel bottle 20 lt. / 200 bar argon,
hose set MB 25/3 m for aluminium
MIG/MAG synergy programmes and functions:
19 optimised MIG/MAG synergic programmes, simple selection
according to material type, gas type and wire diameter
- Operating modes normal, SYN or PULSED 2- or 4-stroke,
Spot welding time 0 - 10 s, No gas/filler wire welding
- MOTOR SLOPE: Soft-start wire feed 0 - 1.5 s
- ARC CONTROL: Arc throttling 0 - 11 (Inductance)
- BBT: Wire burn-back 1 - 10
- POST GAS: GAs post-flow time 0 - 5 s
- 4-stroke: END POWER 30 - 100 %, 0.2 - 2 s for crater filling
TIG functions:
- LIFT TIG ignition function
- Operating modes normal or TIG IMPULSE, 2- p or 4Talt
- 4-times: PULSE FREQ 20 - 250 Hz, TIG BALANCE 20 - 80 %,
TIG 2-VALUE, SLOPE UP/-DOWN 0 - 10/20 s,
END POWER 5 - 200 A, POST GAS 0 - 5 s
MMA functions:
- HOT START+ and ANTI STICK
- Microprocessor control with 3.3' digital display
- VRD: energy-saving unit with low open-circuit voltage
- GEN POWER: Operation by means of current generator possible
Technical data ELMAG MULTIFUNCTION WELDING INVERTER, - STEEL ALU SET 2
- Material thickness 0,5 - 8 mm
- Steel wire diameter MIG/MAG 0.6 - 1.0 mm
- Stainless steel wire diameter MIG/MAG 0,8 - 1,0 mm
- Aluminium wire diameter MIG/MAG 0.8 - 1.2 mm
- Brazing wire diameter MIG/MAG 0,8 - 1,0 mm
- Flux cored wire diameter MIG/MAG 0.8 - 1.0 mm
- Welding rod roll diameter MIG/MAG 100 / 200 mm
- Welding rod roll weight MIG/MAG 5 kg
- Welding electrode diameter MMA 1.6 - 4.0 mm
- Welding current setting range MIG/MAG 20-200 A / TIG DC 5-200 A / MMA 5-200 A
- Electronic welding current control infinitely variable
- 100 % duty cycle (10 min. at 40 °C) at welding current MIG/MAG 140 A / TIG DC 120 A / MMA 120 A
- Duty cycle (10 min at 40°C) at max. welding current MIG/MAG 35/200 A / TIG DC 35/200 A / MMA 35/200
- Open-circuit voltage MIG/MAG 35 V / TIG DC 65 V / MMA 65 V
- Mains connection / phases 230 / 1 V / ~
- Mains frequency 50/60 Hz
- Mains current tolerance ± 10
- Mains fuse slow-blow 32 AT
- Thermal overload protection Yes
- Insulation class H
- Protection class (IP) 22
- Power input l1 max. / l1 eff. MIG/MAG 33/21 A / TIG DC 26.5/14.5 A / MMA 37.5/21.5 A
- Earth connection plug / cross-section 9 / 25 Ø / mm²
- Connection plug 230 V / CEE 32
- Width 280 mm
- Depth 500 mm
- Height 420 mm
- Weight 17 kg
- Feed drive 4 rollers
Highest quality machines from ELMAG
Benefit from a 2 year ELMAG warranty
Accessories for ELMAG machines on request
