ELMAG MULTIFUNCTION WELDING INVERTER, CARRYABLE - STEEL SET

Product Highlights ELMAG MULTIFUNCTION WELDING INVERTER, CARRYABLE - STEEL SET

Flexible use for MIG/MAG, TIG DC and MMA. Continuous or pulsed operation (MIG/MAG / TIG), ideal e.g. for thin aluminium, stainless steel and precision seams.

MOD. ETP 220 SYNPULS - STEEL SET MAG SG2 (1.5125) CONSISTING OF:

• 1 PC. ETP 220 SYNPULS ART. NO. 00360
• INCL. ELECTRODE HOLDER CABLE 25MM²/4M,
• PLUG 16/25MM², EARTH CABLE 25MM²/3M, PLUG 16/25MM², PRESSURE REGULATOR WITH 2 MANOMETERS,
• 3,5M CARBON PTFE CORE, EACH 2 PCS. FEED ROLLERS FOR
• 0,6/0,8 MM & 1,0/1,2 F. FE/CRNI/CUSI, TS & 0,8/1,0 ALU, HA, HOSE PACKAGE ORIG. BINZEL MB 25/3M
• 1 RLL. WELDING WIRE 0,8MM / 5 KG SG2
• ART. NO. 54152
• 1 PC. STEEL CYLINDER MIXED GAS 20 LT. FILLED
• ART. NO. 54202
• UN 1956 COMPRESSED GAS, N.O.S.

(ARGON+CARBON DIOXIDE), CLASS 2, ADR
*CARRIAGE WITHOUT EXCEEDING THE EXEMPTION LIMITS SPECIFIED IN SUBSECTION 1.1.3.6
NOTE: SINGLE PHASE/32 AMPERE MAINS CONNECTION REQUIRED. CLARIFY LOCAL CONDITIONS WITH YOUR
LOCAL CONDITIONS WITH YOUR EVU!

Examples of use ELMAG MULTIFUNCTION WELDING INVERTER, CARRIAGEABLE - STEEL SET

• Car workshops
• Repair/assembly area
• Plumbing shops
• Customer service
• Metal, conservatory & window construction

material:

• Steel
• CrNi
• Aluminium
• MIG brazing

Technical facts ELMAG MULTIFUNCTION WELDING INVERTER, CARRYABLE - STEEL SET

MIG/MAG synergy programs and functions:
19 optimised MIG/MAG synergic programs, easy selection according to material type, gas type and wire diameter
- Operating modes normal, SYN or PULSED 2- or 4-stroke, Spot welding time 0 - 10 s, No gas/filler wire welding
- MOTOR SLOPE: Soft-start wire feed 0 - 1.5 s
- ARC CONTROL: Arc throttling 0 - 11 (Inductance)
- BBT: Wire burn-back 1 - 10
- POST GAS: GAs post-flow time 0 - 5 s
- 4-stroke: END POWER 30 - 100 %, 0.2 - 2 s for crater filling

TIG functions:
- LIFT TIG ignition function
- Operating modes normal or TIG IMPULSE, 2- p or 4Talt
- 4-times: PULSE FREQ 20 - 250 Hz, TIG BALANCE 20 - 80 %, TIG 2-VALUE, SLOPE UP/-DOWN 0 - 10/20 s, END POWER 5 - 200 A, POST GAS 0 - 5 s

MMA functions:
- HOT START+ and ANTI STICK
- Microprocessor control with 3.3' digital display
- VRD: energy-saving unit with low open-circuit voltage
- GEN POWER: Operation by means of current generator possible

Technical data ELMAG MULTIFUNCTION WELDING INVERTER, CARRYABLE - STEEL SET

• Material thickness 0,5 - 8 mm
• Steel wire diameter MIG/MAG 0,6 - 1,0 mm
• Stainless steel wire diameter MIG/MAG 0,8 - 1,0 mm
• Aluminium wire diameter MIG/MAG 0.8 - 1.2 mm
• Brazing wire diameter MIG/MAG 0,8 - 1,0 mm
• Flux cored wire diameter MIG/MAG 0.8 - 1.0 mm
• Welding rod roll diameter MIG/MAG 100 / 200 mm
• Welding rod roll weight MIG/MAG 5 kg
• Welding electrode diameter MMA 1.6 - 4.0 mm
• Welding current setting range MIG/MAG 20-200 A / TIG DC 5-200 A / MMA 5-200 A
• Electronic welding current control infinitely variable
• 100 % duty cycle (10 min. at 40 °C) at welding current MIG/MAG 140 A / TIG DC 120 A / MMA 120 A
• Duty cycle (10 min at 40°C) at max. welding current MIG/MAG 35/200 / TIG DC 35/200 / MMA 35/200 %/A
• Open-circuit voltage MIG/MAG 35 V / TIG DC 65 V / MMA 65 V
• Mains connection / phases 230 / 1 V / ~
• Mains frequency 50/60 Hz
• Mains current tolerance ± 10
• Mains fuse slow-blow 32 AT
• Thermal overload protection Yes
• Insulation class H
• Protection class (IP) 22
• Power input l1 max. / l1 eff. MIG/MAG 33/21 A / TIG DC 26.5/14.5 A / MMA 37.5/21.5 A
• Earth connection plug / cross-section 9 / 25 Ø / mm²
• Connection plug 230 V / CEE 32
• Width 280 mm
• Depth 500 mm
• Height 420 mm
• Weight 17 kg
• Feed drive 4 rollers

Highest quality machines from ELMAG
Benefit from a 2 year ELMAG warranty

Accessories for ELMAG machines on request