Product highlights ELMAG MFB 45 SGV gearbox milling and drilling machine
High-speed column model 1,100 / 850 W
The MFB 45 SGV can do everything: face and end milling, drilling, countersinking, reaming and thread cutting. The machine is equipped with a smooth-running, height-adjustable coordinate cross table. Thanks to an extended quill distance to the base plate of 1,280 mm, it can also be used for machining high workpieces. Extended flexibility is offered by a swivel and height-adjustable milling head, an automatic quill feed with three switching stages, an operating mode for thread cutting and an integrated coolant system with tank in the machine base.
Technical facts ELMAG MFB 45 SGV gearbox milling and drilling machine
- Milling capacity Ø 80 / 32 mm
- Cubic capacity 730 x 210 x 790 mm
- Spindle throat depth 270 mm
- Table travel 375 x 200 mm
- Swivel milling head +-90°
- Drive motor 2-stage 1,100 W / 850 W, 400 V
- 12 Speeds 75 - 3,200 rpm
- Right and left rotation
- Operating mode drilling/milling and thread cutting
- Automatic quill feed, 3-stage 0.10 / 0.18 / 0.28 mm/rev
- Precision micro feed unit
- Milling spindle with precision bearing
- Tightening spindle for high safety
- Milling spindle protection cover
- Drilling depth scale and stop
- Milling spindle protection cover
- Drilling depth scale
- Emergency stop button / zero voltage release
- Keyless drill chuck B18, 1 - 16 mm
- Taper mandrel MK 4 / B 16, IG M16
- Reducing sleeve MK 4 / MK 3
- Reducing sleeve MK 4 / MK 2
- Tightening spindle M16
- Tool kit
- Operating instructions / CE
Technical data ELMAG MFB 45 SGV gearbox milling and drilling machine
- drilling capacity in steel: 45mm
- Thread cutting capacity: M20
- Milling capacity face milling cutter: 80mm
- Milling performance end mill: 32mm
- Spindle mount (turning spindle): MK 4
- Speed range 1: 75 - 1600 rpm
- Speed range 2: 150 - 3200 rpm
- Speed steps: 12
- quill stroke: 120mm
- column diameter: 115mm
- milling head stroke: 440mm
- spindle throat: 270mm
- Milling head swivel range: ± 90°
- quill distance table min./max.: 0 - 790mm
- quill distance base: 1280mm
- milling table surface: 730 x 210mm
- quill feed steps: 3
- milling table stroke: 515mm
- table travel X x Y: 375 x 200mm
- Motor power: (2-stage) 1100 / 850W
- Coolant pump: 40W
- Power supply: 400 / 50 - 60V/Hz
- Coolant pump capacity: 0l/min
- Cubature: 730 x 210 x 790mm
- length x width: 1115 x 1100mm
- height: 2110mm
- Weight: 350kg
Highest quality of ELMAG machines
Benefit from a 2 year ELMAG warranty
Accessories for ELMAG machines on request
