Product Highlights ELMAG EUROMIG plus 272 shielding gas welding machine
Materials
- Steel
- CrNi
- Aluminium
Typical applications ELMAG EUROMIG plus 272 inert gas welding machine
- Mechanical Engineering
- Steel construction
- Metalworking shops
- Forging
- Agriculture
Technical facts ELMAG EUROMIG plus 272 inert gas welding machine
- EUROMIG plus - Overview
- Ergonomic control panel, inclined arrangement
- Fine step switch with ten switching steps
- Wire feed controller stepless
- Spot welding automatic stepless
- Automatic interval welding stepless
- operating mode switch: 2-stroke, 4-stroke, punk- & interval, welding mode, wire feed without gas consumption
- Temperature control lamp - overload protection incl. automatic reset, thermal sensor integrated in transformer winding
- Powerful cooling fans with thermostat control
- Main switch with operating lamp
- Dimensions fine/coarse Plug Ø 13 mm 35/50 mm² f. Materialst. small or large
- Hose package connection Original BINZEL
- Wire feed motor gear drive, two rollers
- High power transformer with first-class, back-ventilated copper winding, winding materials insulation class H (180°C)
- Optimally dimensioned silicon plate rectifier for highest welding current quality
- Tool tray with anti-slip coating
- Original BINZEL hose package MB 25 / 3 m
- Earth cable with welding cable plug / earth terminal
- Pressure regulator / pressure gauge / flow meter
- Feed rollers Wire diameter 0.6 / 0.8 mm
- Feed rollers Wire diameter 1.0 / 1.2 mm
- Wire spool adapter 5 kg / 200 mm
- Wire spool adapter 15 kg / 300 mm
- Hand welding shield PVC including welding glass
- Separating spray for welding nozzles
- Operating instructions / CE
Technical data ELMAG EUROMIG plus 272 shielding gas welding machine
- Material thickness: 0.5 - 10 mm
- Steel / stainless steel wire diameter: 0.6 - 1.2 mm
- Aluminium wire diameter: 1.0 - 1.2 mm
- welding rod roll diameter: 200 / 300 mm
- welding rod roll weight: 5 / 15 kg
- Welding current setting range: 20 - 260 A
- Welding current switching stages: 10 No.
- 100 % duty cycle (10 min. at 40 °C) at welding current: 100 / 120 A
- Duty cycle (10 min at 40°C) at max. welding current: 20 / 260 % / A
- Mains connection / phases: 400 / 3 V / ~
- Mains frequency: 50 - 60 Hz
- Mains fuse protection slow: 16 AT
- Protection class (IP): 21 S
- Connection sockets: Ø 13 / 35 mm²
- Feed drive X/Y/Z: 2 rollers
- Connection plug: CEE 16 A
- width: 535 mm
- depth: 840 mm
- height: 780 mm
- Weight: 85 kg
Highest quality of ELMAG machines
Benefit from a 2 year ELMAG warranty
Accessories for ELMAG machines on request
