ELMAG EPS 435, Roloc Ø 50mm DL gun grinder

ELMAG EPS
The cutting-edge EPS models are highly ergonomic high-tech products for trade, commerce and industry, but also for private workshops and garages.

EPS TECHNOLOGY
Developed in the technical laboratory under real-life practical conditions, EPS pneumatic tools are characterised by outstanding technical perfection.

Tight manufacturing tolerances, self-centring, precision-ground air motors and high-precision quality bearings from leading brand manufacturers ensure improved running smoothness, optimised air consumption and maximum product performance.

EPS SAFETY
Pneumatic tools are the safest powered tools. They generally offer significantly more safety than electric tools and are also more ergonomic than them. Without an electric motor, a more manageable and user-friendly design is possible and - what is particularly advantageous - there is no risk of electric shock or explosion. In addition, air tools can also be used safely in wet environments.

CARE AND OPERATION
Built for continuous use under the toughest conditions, DL tools require a minimum of care. Provided clean and dry (condensate-free) compressed air is used as the drive medium. Water residues cause corrosion and thus damage to the air motor and components. Compressed air treated by refrigeration dryers and filters is optimal.

By the way - compressed air must be oiled! It is easiest to use maintenance units, automatic oilers or inline oilers. It is advisable to add a few drops of ELMAG oiler oil directly into the air connection opening before and after each working day or before longer breaks.

COMPRESSED AIR HOSE LENGTH
The longer the compressed air hose, the lower the available operating pressure. For a 10-metre compressed air hose with an internal diameter of 10 millimetres, the pressure loss is approx. 1.4 bar.
The operating pressure must therefore be set correspondingly higher on the compressor by means of the pressure regulator.

Selection recommendation
We recommend limiting the hose length to a maximum of 10 metres and selecting a hose inner diameter of 10 millimetres.